Option "ZMin" "number" Minimum pressure reading that will be accepted from the Stylus tool. Option "YSize" "number" Third of three sets of parameters to set the active zone. Parameter is expressed in relative coordinates from the This sets the XĬoordinate of the bottom corner of the active zone. Option "XSize" "number" Third of three sets of parameters to set the active zone. Option "YOffset" "number" Third of three sets of parameters to set the active zone. This sets the XĬoordinate of the top corner of the active zone. Option "XOffset" "number" Third of three sets of parameters to set the active zone. The Top YĬorner's coordinate is fixed at 0. The Y coordinate of the bottom corner of the active zone. Option "YMax" "number" Second of three sets of parameters to set the active zone. The Top XĬorner's coordinate is fixed at 0. The X coordinate of the bottom corner of the active zone.
Option "XMax" "number" Second of three sets of parameters to set the active zone. Option "YBottom" "number" First of three sets of parameters to set the active zone. Option "XBottom" "Inumber" First of three sets of parameters to set the active zone. This sets the YĬoordinate of the top corner of the active zone. Option "YTop" "number" First of three sets of parameters to set the active zone. Option "XTop" "number" First of three sets of parameters to set the active zone. The feature is enabled for any other value. When the value of the feedback is zero, the feature You can use the last available integer feedback toĬontrol this feature. When this feature is enabled, theĭevice will take control of the core pointer (and thus will emit coreĮvents) and at the same time will be able, when asked so, to reportĮxtended events. Option "AlwaysCore" "on" enables the sharing of the core pointer. Option "HistorySize" "number" sets the motion history size. Option "Mode" "Relative"|"Absolute" sets the mode of the device. Option "DeviceName" "name" sets the name of the X device. This setting is mandatory, as USB is the only protocol supported by thisĭriver. Option "USB" "on" specifies that you are using the USB bus to communicate with your tablet. Same value if you want to have multiple devices with the same tablet. You have to specify it for each subsection with the
#Aiptek tablet drivers serial#
Option "Device" "path" sets the path to the special file which represents serial line where the Option "Type" "stylus"|"eraser"|"cursor" sets the type of tool the device represent. Useful to define multiple devices with different active zones. Multiple instances of the Aiptek devices can cohabit. This section only coversĬonfiguration details specific to this driver.
Please refer to nf(5) for general configuration details and for options USB-based input tablet on some Linux platforms.
#Aiptek tablet drivers driver#
This driver supports the Aiptek HyperPen 4000U, 5000U, 6000U, 8000U and 12000U May be used as the X server's core pointer. The aiptek driver functions as a pointer input device, and
RS-232C-based HyperPens, please see the "hyperpen" driver. This driver only supports the USB protocol, and only under Linux for SYNOPSIS ¶ Section "InputDevice" Identifier " idevname " Driver "aiptek" Option "Device" " devpath "ĮndSection DESCRIPTION ¶ aiptek is an Xorg input driver for Aiptek HyperPen USB-based tabletĭevices. Aiptek - Aiptek USB Digital Tablet Input Driver for Linux
0 kommentar(er)
